Seca 604 Instrucciones De Uso página 102

Setting up the device in the seca connect 103 software
Entering the server address
102 • seca 604, seca 495/495 r/496, seca 404/405, seca 446/448, seca 442, seca 438, seca 476
NOTE
The measurement procedure (workflow settings) can be individually
adapted in the seca connect 103
For data transmission between the device and your EMR system, the device
must be set up in the
seca connect 103
lowing data must be entered:
• Device name
• Setup location
• Measurement (workflow settings)
• IP address or server name (DNS) of the
• Network port
1. Set up the device in the
system instructions for use.
seca 103/452
ð The software generates a QR code containing the entered information.
2. Make sure that a barcode scanner is connected to the device
ing a barcode scanner
3. Scan the QR code from the software user interface or from a paper printout.
ð The settings made in the
device.
4. You have the following options for continuing:
► LAN: Connect the device to the network using a LAN cable
► WiFi connection via
nect 103, page 105
NOTICE!
Malfunction
To be able to transmit measuring results to an EMR System, an inter-
face must be set up between the
EMR system.
► Observe the
► Set up the interface in cooperation with the manufacturer of your
EMR system.
Device mode
Basic
Advanced
Expert
Service
In order to be able to use network functions, the device must be connected to
one of the following servers - depending on your individual application:
• seca connect 103 , local installation: Local server on which the
seca connect 103 software is installed.
software.
software. Amongst other things, the fol-
seca connect 103
software as described in the
seca connect 103
(optional), page 53).
seca connect 103
è Setting up WiFi via seca con-
:
seca connect 103
seca connect 103
seca 103/452 system instructions for use.
Function available
server
(è Connect-
software are stored in the
software and the
–
–
•
•