Connecting the device to a WiFi network (WPS)
WPS button
Permitting anonymous measurements
106 • seca 604, seca 495/495 r/496, seca 404/405, seca 446/448, seca 442, seca 438, seca 476
2. Ensure that the WiFi function of the device is activated
vating the WiFi
function, page 103.
3. Enter the data for the WiFi network in the
scribed in the
seca 103/452
ð The software generates a QR code containing the entered information.
4. Make sure that a barcode scanner is connected to the device
a barcode scanner
(optional), page 53.
5. Scan the QR code from the software user interface.
ð The settings made in the
device.
ð The device connects to the router of the WiFi network.
ð As soon as the device is connected to the WiFi network, the
is permanently on.
Connect your device to the WiFi network via WPS if no barcode scanner is con-
nected to the device and you have access to the router.
1. Ensure that the WiFi function of the device is activated
vating the WiFi
function, page 103.
2. Press the WPS button on the router and on the connection panel of the
weighing platform.
ð The device connects to the router of the WiFi network.
ð As soon as the device is connected to the WiFi network, the
is permanently on.
NOTICE!
Malfunction, incomplete data transmission
Further settings must be made to enable measurement data to be
transmitted to an EMR System via the
► Observe the
Device mode
Basic
Advanced
Expert
Service
If the device is connected to a suitable EMR System via the
software, you can permit anonymous measurements. If you activate this func-
tion, the device does not request user ID or patient data (date of birth, patient
ID).
seca connect 103
system instructions for use.
seca connect 103
seca connect 103
system instructions for use.
seca 103/452
Function available
è Activating/deacti-
software as de-
è Connecting
software are stored in the
symbol
è Activating/deacti-
symbol
software.
–
–
–
•
seca connect 103