Publicidad
Idiomas disponibles
Idiomas disponibles
5.20
Mounting the magnetic display holder on the wall (optional)
50 • seca 604, seca 495/495 r/496, seca 404/405, seca 446/448, seca 442, seca 438, seca 476
NOTE
The supplied wall plugs are intended for mounting on solid walls. Spe-
cial wall plugs may be required for other wall types.
► Note the length of the display cable before determining the height
of the installation point.
1. Mark the drill holes at the required height.
2. Drill the holes (Ø 5 mm, approx. 40 mm deep).
3. Insert the wall plugs into the drill holes.
4. Insert the supplied screws into the wall plugs.
Publicidad
