Functional Description - Milwaukee M12 Manual Del Operador

energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
READ AND SAVE
ALL INSTRUCTIONS
FOR FUTURE
REFERENCE.
SYMBOLOGY
Volts
Direct Current
Amps
BFP
Backfeed Protected
Properly Recycle Batteries
California Energy Commission
Read Operator's Manual
UL Listing for Canada and U.S.
C US
SPECIFICATIONS
Charger Cat. No. ................................ 48-59-1201
Input....................................................5 VDC, 2.1 A
Output .........................................................12 VDC
USB Output ........................................9 VDC, 1.6 A
Operating Temperature
Battery and Charger .......................40°F to 104°F
Battery and Tool ................................0°F to 167°F
Power Supply Cat. No. .........................44-66-1202
Wall Plug Input Volts ....................................120 AC
Battery Cat. No.................................... 48-11-2401
Volts .............................................................. 12 DC
Battery Cat. No.................................... 48-11-2402
Volts .............................................................. 12 DC
Battery Cat. No.................................... 48-11-2420
Volts .............................................................. 12 DC
Battery Cat. No.................................... 48-11-2430
Volts .............................................................. 12 DC
Battery Cat. No.................................... 48-11-2440
Volts .............................................................. 12 DC
Battery Cat. No.................................... 48-11-2460
Volts .............................................................. 12 DC
1. USB A port (output)
2. Power cable port (output)
3. Charging indicator LEDs
4. Micro-USB port (input)
5. USB power button
6. Fuel gauge
7. Contacts
8. Release buttons
9. Micro-USB Cable
10. Micro-USB
11. USB A
12. Wall plug prongs
13. Wall plug USB A port (output)
MILWAUKEE LI-ION
WARNING
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
cause a short circuit.
5 VDC, 2.1 A
Do not expose your battery pack or cordless tools
to water or rain, or allow them to get wet. This could
damage the tool and battery pack. Do not use oil or
(4°C to 40°C)
solvents to clean or lubricate your battery pack. The
plastic casing will become brittle and crack, causing
(-18°C to 75°C)
a risk of injury.
Store battery packs at room temperature away from
moisture. Do not store in damp locations where cor-
rosion of terminals may occur. As with other battery
pack types, permanent capacity loss can result if
the pack is stored for long periods of time at high
temperatures (over 120° F). MILWAUKEE Li-Ion
battery packs maintain their charge during storage
longer than other battery pack types. After about a
year of storage, charge the pack as normal.
3
FUNCTIONAL
DESCRIPTION
2
1
BATTERY PACKS
To reduce the risk of fire, personal
injury, and product damage due to
Maintenance and Storage
3
4
5
6
7
10
8
9
12
11
13