Connection With Aerocool Cooling Unit; Remote Control Connection; Maintenance Instructions - Solter AEROTIG 3320 DC Manual De Instrucciones

CONNECTION WITH AEROCOOL COOLING UNIT

NNECTION WITH AEROCOOL COOLING UNIT
It is only possible with Aerotig 3320 DC model. It is only possible with Aerotig 3320 DC model.
The planned operation of the cooling unit is fully automatic. The power unit will The planned operation of the cooling unit is fully automatic. The power unit will
detect the cooling unit without any adjustment. Connect the cooling unit to the detect the cooling unit without any adjustment. Connect the cooling unit to the
remote connector at the base of the power unit. It may be necessary to remove the nector at the base of the power unit. It may be necessary to remove the
protective cover. Please, make sure that once the cooling unit and power unit are protective cover. Please, make sure that once the cooling unit and power unit are
interconnected, the connection is well secured to avoid false contacts of the interconnected, the connection is well secured to avoid false contacts of the
interconnecting cable. During the first use, you may need to check the priming of the
coolant in the circuit. The machine will try to do it automatically. Alarm message 10 coolant in the circuit. The machine will try to do it automatically. Alarm message 10
may appear during the process. For more information on the operating modes of the may appear during the process. For more information on the operating modes of the
cooling unit, please, see the description of advanced setting parameter P.36 in this
manual and/or the Aerocool cooling unit manual. manual and/or the Aerocool cooling unit manual

REMOTE CONTROL CONNECTION

REMOTE CONTROL CONNECTION
We recommend using original accessories. If you need to connect other accessories or remote control units, ensure We recommend using original accessories. If you need to connect other accessories or remote control units, ensure We recommend using original accessories. If you need to connect other accessories or remote control units, ensure
that the connection is compatible. Incorrect or faulty connections may cause machine malfunctions or even a t the connection is compatible. Incorrect or faulty connections may cause machine malfunctions or even a t the connection is compatible. Incorrect or faulty connections may cause machine malfunctions or even a
breakdown. The remote control potentiometer can be from 4K7 ohms to 20K ohms. A value of 10K ohms is breakdown. The remote control potentiometer can be from 4K7 ohms to 20K ohms. A value of 10K ohms is breakdown. The remote control potentiometer can be from 4K7 ohms to 20K ohms. A value of 10K ohms is
recommended. See figure below for reference in the connection of remote control systems compatible with the Aerotig recommended. See figure below for reference in the
and Aeroarc machines.

MAINTENANCE INSTRUCTIONS

MAINTENANCE INSTRUCTIONS
Regular monitoring of the machine is recommended. Before performing any maintenance, disconnect the machine Regular monitoring of the machine is recommended. Before performing any maintenance, disconnect the machine Regular monitoring of the machine is recommended. Before performing any maintenance, disconnect the machine
from the mains. Reduce the recommended maintenance intervals in situations of intensive use
INTERVAL
Weekly
Quarterly
Annual
SOLTER SOLDADURA S.L.
uring the first use, you may need to check the priming of the
the description of advanced setting parameter P.36 in this
ommended maintenance intervals in situations of intensive use. ommended maintenance intervals in situations of intensive use
Check the condition of wiring and external accessories. Check the condition of wiring and external accessories. Check the condition of wiring and external accessories.
Blow out the feed guide of the torch with compressed air and replace worn Blow out the feed guide of the torch with compressed air and replace worn Blow out the feed guide of the torch with compressed air and replace worn
components. components.
Clean and tighten the ele Clean and tighten the electrical connections of the welding circuit
Clean the drive unit with compressed air. Clean the drive unit with compressed air.
Remove all rollers from the drive unit, clean to remove dust and dirt and Remove all rollers from the drive unit, clean to remove dust and dirt and Remove all rollers from the drive unit, clean to remove dust and dirt and
lubricate slightly. lubricate slightly.
Carry out a complete inspection as specified by the standard EN-60974. Carry out a complete inspection as specified by the standa Carry out a complete inspection as specified by the standa
See your dealer. See your dealer.
connection of remote control systems compatible with the Aerotig
ACTION
ctrical connections of the welding circuit
12