Placing And Operating Of Components - CONOR WRC ISO 4210 Manual De Instrucciones

5. PLACING AND OPERATING OF COMPONENTS

1. Saddle and seat post
The saddle has to be fixed over the seat post, in horizontal and central
position regarding the top tube.
The seat post has to be inserted in the frame, respect to the mínimum
insertion which is coined in the side of seat post. Use the quick release
of the frame to hold the seat post.
2. Handlebar and Stem
The handlebar has to be fitted over the stem and adjusted with the
screws.
The stem joins the handlebar to the frame and has to be centred
respect to the rear wheel.
1.3 Front wheel, rear wheel and tires
The front wheel has to be centred respect the fork and fitted with the
quick release.
The rear wheel as the front one, has to be centred respect the frame
and fitted with the quick release.
The tires have to keep the suitable air pressure in each situation. It is
important that the drawing tires are simple.
1.4. Breaks
They are essential parts of the bicycle. They have to be tight and with
break pad in good conditions of use. Replace in case of wear.
1.5 Pedals.
Made by plastic, steel or aluminium, they have to turn over its axle.
1.6 Lighting
Check the correct operating and lineup respect the bicycle. It is
advisable keep clean the lighting group.
8