CONOR WRC ISO 4210 Manual De Instrucciones página 61

ASSEMBLE OF THE PEDALS
For a safe operating, has to be firmly set the pedal axle in the thread
crank.
Replace the damaged pedals in any case.
Start by hand of each pedal assembled axile not to damage the cranks.
1. Find the letter "R" or "L" coined in the pedal axle.
2. Assemble the coined pedal "R" in the right crank (same freewheel
side). Turn the axle in clockwise direction. Tighten firmly with 15mm
wrench.
3. Place the marked pedal "L" in the left crank of the bicycle. Turn the
pedal axle in the anti-clockwise direction and tighten firmly with the
15mm wrench.
Assure that each pedal is correctly tighten. It is important to wear
the suitable footwear for use of the bicycle.
OPERATING OF SHIFTER LEVER AND DERAILLEUR
EN
21