CONOR WRC ISO 4210 Manual De Instrucciones página 65

10. If it is necessary, turn the adjust screw of low speeds "L" in the anti-
clockwise direction till the chain don't move from biggest freewheel.
11. Whether the chain couldn't reach the biggest freewheel or would
be difficult the movement, turn the adjust screw "L" in the anti-
clockwise directions.
REGULATION OF V-BRAKE
Usually the front brake lever is placed on the left hadlebar side and the
rear brake lever on the right side. It could be changed for left-handed
people.
More strength is required for the rear brake caused by the length of the
cable. It is advisable to assemble the rear brake lever to be use with the
strongest hand.
Get familiar with the usega of brakes. With correct assembled brakes
the control is more effective.
Keep the suitable adjustment and right operating on the brakes.
Brakes adjustments
1. Loosen the cable tighten bolt (use an Allen 5mm wrench)
2. Tight the brake shoes against the rim. Be helped by a rope, using a
hand tool or support of another person.
3. Strech the end of the cable with pliers and hold it while the rope
tightening.
4. Put again the protection in the cable if it was previously move
removed.
EN
25