Displaying The Software Release; Procedure For Testing Connections To Capacitor Steps - Ducati Energia REGO 5 Manual De Instrucciones

appear, followed by the number of switching operations. A "." is used to
separate thousands.
Ex.
Press the DATA key to display the number of switching operations of
the next relay; after viewing the data of the last relay, press the DATA
key to exit the function.
Important: when an output relay counter totals over 100,000 switching
operations, the LED corresponding to the step will flash to warn of the
need to overhaul/replace the contactors. The output will not be disabled,
only a warning will be signaled.

12.6 DISPLAYING THE SOFTWARE RELEASE

To display the software release number of the controller, press ALARM/
RESET + DATA: the display will alternately show "Flr" and the firmware
version "x.xx".
12.7 PROCEDURE FOR TESTING CONNECTIONS TO CAPACITOR
STEPS
An automatic procedure is provided to make it easier to check the
efficiency of connections to the capacitor steps, independently of the
mains network status and the presence of current on terminals "K" ed
"L". This procedure can be launched by pressing DATA + AUTO/MAN,
79