MOD (Modulation)
These effects broaden and/or modulate the sound .
When the effect is on, the indicator lights .
1
2
3
In Manual Mode, use the Number
[3]/[MOD] pedal to turn on and off .
Type of Effect
1 . PHASER
2 . FLANGER
3 . TREMOLO
4 . CHORUS
5 . VIBRATO
6 . PITCH SHIFT
7 . HARMONIST
8 . ROTARY
9 . UNI-V
10 . DELAY
11 . OVERTONE
Choose the type of modulation .
Type of Effect
Explanation
By adding phase-shifted components to the sound, this effect gives a whooshing,
1 . PHASER
swirling character to the sound .
2 . FLANGER
This effect gives an undulating, jet-airplane-like character to the sound .
3 . TREMOLO
This effect gives a retro feeling by creating a cyclic change in volume .
This stereo effect adds subtle wavering to transform the tone into one that is broader,
4 . CHORUS
thicker, and more beautiful .
5 . VIBRATO
This produces an intense vibrato effect unobtainable with normal guitar playing .
This effect changes the pitch of the original sound (up or down) within a range of two
6 . PITCH SHIFT
octaves .
This creates harmonies reminiscent of twin guitars .
7 . HARMONIST
* Play only single notes .
8 . ROTARY
This stereo effect produces the sound of rotating speakers .
9 . UNI-V
This models the Uni-Vibe, an effect that's essential to the rock sound of the 1960's .
This delays the sound to produce an echo-like effect . At delay times of 10 to 600 ms
10 . DELAY
(milliseconds), you can use it as a secondary delay .
This next-generation effect creates new overtones that add more body to the sound .
11 . OVERTONE
You can enjoy the effect not only when playing single notes, but also when playing
chords . This effect is suited to either clean or distorted sound .
1
2
RATE
DEPTH
Sets the speed of the effect .
Sets the richness of the effect .
RATE
DEPTH
Sets the speed of the effect .
Sets the richness of the effect .
PITCH
D. LEVEL
Sets the amount of pitch-shifting .
Sets the volume level of the direct sound .
KEY
HARMONY
Sets the musical key of the song
Sets the pitch of the harmony .
being played .
Ex .
(E)
(C#)
RATE
DEPTH
Sets the speed of the effect .
Sets the richness of the effect .
TIME
FEEDBACK
Sets the delay time (10 to 600
Sets the number of repetitions for the delay .
ms), in steps of 10 ms .
UPPER
LOWER
Sets the volume level of the
Sets the volume level of the sound an octave below .
sound an octave above .
-1 Octave
Detune
3rd
Using the Effects
3
RESONANCE
Sets the intensity of the
effect .
E. LEVEL
Sets the volume level of
the effect .
E. LEVEL
Sets the volume level of
the harmonies .
+1 Octave
E. LEVEL
Sets the volume level of
the effect .
D. LEVEL
Sets the volume level of
the direct sound .
7