Noise Conditions; Removal Of Package - Fox F36-255 Manual De Instrucciones

The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level
- Sound power level
- Uncertainty of measurement
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the blade and
the material to be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far as the
saw blade is concerned, it is preferable to use silenced type of blades and to keep them in good
conditions. We recommend to use the correct saw blade and to keep firmly the workpiece to be cut.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if
there is a connection between emission levels and exposure levels, the first ones cannot be used to
determine safely if other precautions are necessary. The factors that can influence the actual
exposure level of the operator include the exposure length, environment features and other sources
of noise, as for example the number of machines and operations present. Besides, exposure levels
can change from country to country. However, these instructions enable the user of the machine to
better evaluate the dangers and risks.
The package of the mitre saw includes:
1 – Mitre saw
2 – Dust collection pipe fitting
3 – Cut-off extensions (2 side extensions, 1 back extension)
4 – Vertical clamp
5 – Dust bag
6 – Maintenance wrenches
Remove the mitre saw and all the parts from the packaging, check if there are any missing or
damaged parts.
If you find any faulty or damaged parts do not use them in order not to endanger the efficiency and
the safety of the machine. To change faulty parts consult an after sales centre.
To make the table saw perfectly work you must assemble the various parts, for which you can
find a detailed explanation later on.
EN

NOISE CONDITIONS

LpA = 91,9,2 dB(A)
LWA = 104.9 dB(A)
K = 3 dB

REMOVAL OF PACKAGE

35