Mode com XVIN Manual De Usuario página 17

Clicking
Clicking means pushing and releasing a button. To left-click, move the cursor to the item
you wish to select, press the left button once, and then immediately release it. To right click,
move the mouse cursor to the item you wish to select, press the right button once, and then
immediately release it. You also have the option to perform the clicking operation by tap-
ping lightly on the TouchPad once.
Double-Clicking
Double-clicking means pushing and releasing the left button twice in rapid succession. This
procedure does not function with the right button. To double-click, move the cursor to
the item you wish to select, press the left button twice, and then immediately release it.
You also have the option to perform the double-click operation by tapping lightly on the
TouchPad twice.
Dragging
Dragging means pressing and holding the left button, while moving the cursor. To drag,
move the cursor to the item you wish to move. Press and hold the left button while mo-
ving the item to its new location and then release it. Dragging can also be done using the
TouchPad. First, tap the TouchPad twice over the item you wish to move making sure to le-
ave your nger on the pad after the nal tap. Next, move the object to its new location by
moving your nger across the TouchPad, and then release your nger.
Using the Scroll buttons allows you to navigate through a document quickly without using
the window's scroll bars. This is particularly useful when you are navigating through on-line
pages.
Memory Module Upgrade
Your notebook PC comes with either 128MB of high speed Synchronous Dynamic RAM
(SDRAM) factory installed. To increase your notebook's memory capacity (up to 2GB maxi-
mum), you may install an additional memory upgrade module. The memory upgrade must
be a dual-inline (DIMM) SDRAM module.
Do not remove any screws from the memory upgrade module compartment except for the
ones speci cally shown in the directions here.
Installing a Memory Module
To install a memory upgrade module follow these steps:
1. Turn o power to your notebook using the power switch, disconnect the power adapter,
and/or remove the battery pack.
2. Place your notebook upside-down on a clean work surface.
17