Models And Contents Of The Package; Product Description - Dea LIVI 400 Instrucciones De Uso

Operating instructions and warnings
WARNING Wrong assessment of impact forces may cause
serious damage to people, animal and things. DEA System re-
minds all personnel that the installer must ascertain that these
impact forces, measured according to EN 12245 prescriptions,
are actually below the limits indicated by EN12453 regulation.
WARNING Dispose of batteries according to local regu-
lations in force (after they have been removed by qualified
personnel by cutting the fastening clamps).
3 MODELS AND CONTENTS
OF THE PACKAGE
The name LIVI 400 identifies a series of electromechanical
operators with different features as to motor and control board
power supply voltage, range of built-in or external control board
and mechanical adjustment of force, electronic clutch and built-
in limit switch. DEA System articles in the series are listed in the
"AVAILABLE MODELS" table. LIVI 400 is completed by a set of
accessories listed in the "PRODUCT ACCESSORIES" table.Inspect
the "Contents of the Package" on Page 30 and compare it with
your product for useful consultation during assembly.
4 OPERATING INSTRUCTIONS
In compliance with Directive 98/37/CE Enclosure I, Point
1.7.4.

4.1 Product description

LIVI 400 is an electro-mechanical operator designed for the
automation of sliding gates. LIVI 400 is basically made up of
a mechanical gear motor (vedi F1 pag. 30) rotating the draft
gear that, in association to a properly installed rack, conver-
ts the circular movement of the gear motor into straight-line
movement, thus allowing the gate to move in its own slide.
4.2 Technical data
See the "TECHNICAL DATA" table.
4.3 Labelling information
Part of the summarised data for the CE label are listed in the
label applied to the product (see Position F5, Page 30); the data
regarding the seller are found in the enclosed Warranty, while
"Indispensable Operating Safety Elements" are found under
Point "4.2 Technical data".
4.4 Appropriate conditions of use
"TECHNICAL DATA" table
8
Single-phase power supply voltage (V)
380/220 V a.c. ±10% (50/60 Hz) - 24 V d.c.
Absorber power (W)
Built-in capacitor (µF)
Work cycle
Max Thrust (N)
Weight of product (Kg)
Operating temperature range (°C)
Motor thermal protection (°C)
Speed (m/min)
Degree of protection
Overall dimensions
L I V I 4 0 0
WARNING Disposal of packaging materials (such as plastic,
card board, etc.) must be done according to regulations in
force locally. Do not leave plastic bags and polystyrene within
the reach of children.
805RR
3/24
3/24/B
6/24
6/24/B
230 V a.c. 230 V a.c.
320 450
8
45s-1s-45s x5 45s-1s-45s x8
times times
90 min PAUSE 90 min PAUSE
340 490
11
140°
10
"PRODUCT ACCESSORIES" table
Article
Descrizione
Codice
111
619000
112
126001
113
126000
460
619010
"AVAILABLE MODELS" table
Power
supply
tension
400 230 V a.c. 400 NO MEC NO NO
614030
401 230 V a.c. 400 YES MEC NO NO
614040
6RR 230 V a.c. 600 YES
614000
800 230 V a.c. 800 NO MEC NO NO
615050
801 230 V a.c. 800 YES MEC NO NO
615060
9RR 230 V a.c. 900 YES
615000
804 230 V a.c. 800 NO MEC NO NO
615040
230 V a.c. 800 YES
615010
230 V a.c. 350 YES
614010
230 V a.c. 350 YES
614020
230 V a.c. 600 YES
615020
230 V a.c. 600 YES
615030
230 V a.c.
350
12,5
45s-1s-45s x6
times
100 min PAUSE
275 210
12,5
-20 ÷ 60
160°
10,8
IPX4
see F2 Pag. 31
Nylon rack
Zinc plated rack
22x22
Zinc plated rack
30x12
Foundation base
to be cemented
ELE YES NO
ELE YES NO
ELE YES NO
ELE NO NO
ELE NO YES
ELE NO NO
ELE NO YES
24 V d.c.
80
-
45s-1s-45s x5
times
5 min PAUSE
260
12
-
10 8,2