Presser Foot Lifter; Thread Cutter; Extension Table - Janome DC 4030 Manual De Instrucciones

Tabla de contenido

Publicidad

w
e
q
r
w
q
e
w
q
e
14

Presser Foot Lifter

q Presser foot lifter
w Normal up position
e Highest position
The presser foot lifter q raises and lowers the presser
foot.
You can raise it about 1/4˝ (0.6 cm) higher than the normal
up position w for easy removal of the presser foot, or to
help you place thick material under the foot.

Thread Cutter

q Thread cutter
You do not need a pair of scissors to cut the thread after
sewing. Simply use the built-in thread cutter.

Extension Table

• Detaching the table
Pull the table away from the machine, as illustrated, for
"free-arm" sewing of cuffs and sleeves.
• Attaching the table
Push the extension table q, inserting the pin w into the
hole e, until the extension table q snaps into the
machine.
q Extension table
w Pin
e Hole
r Free-arm
• Accessory case
Many sewing accessories are stored in the accessory
case.

Publicidad

Tabla de contenido
loading

Tabla de contenido