Extension Cords - skilsaw SPT79 Instrucciones De Funcionamiento Y Seguridad

If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent exces-
sive voltage drop, loss of power or overheat-
ing. Grounded tools must use 3-wire extension
cords that have 3-prong plugs and recepta-
cles.
The GFCI supplied with
the tool may not guard
against electric shock from possible de-
fects or faults in an extension cord. If the
use of an extension cord is necessary, the ex-
tension cord must be plugged into a GFCI pro-
tected outlet.
The use of any other accessories not specified in this manual may cre-
ate a hazard.
Store accessories in a dry and temperate environment to avoid corrosion and deteriora-
tion.
Included Accessories
Wrench
Vacuum Hose Adapter
Water Feed Assembly
Quick-connect Hose Adapter
16
1619X09633.indd 16

Extension cords

RECOMMENDED SIZES OF EXTENSION
NOTE: The smaller the gauge number, the
higher the cord capacity.
Tool's
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
Accessories
7" (178mm) Segmented diamond cut-off
wheel less than 3/8" (10mm) thick, having a
negative rake angle and no more than 3/8"
(10mm) gap between the segments.
CORDS
120 VOLT ALTERNATING
CURRENT TOOLS
Cord Size in A.W.G. Wire Sizes in mm
Cord length in feet Cord length in Meters
25 50 100 150 15
18 16 16 14 0.75
18 16 14 12 0.75
18 16 14 12 0.75
16 16 14 12 1.0
14 12 — — —
Optional Accessories
2
30 60 120
0.75 1.5 2.5
1.0 2.5 4.0
1.0 2.5 4.0
2.5 4.0 —
— — —
10/7/16 3:58 PM