Maintenance And Technical Support; Recommendations To Protect The Environment - LERICA C254 Manual De Uso Y Mantenimento

Rev. 03 - 07/2015 - Cod. 1501151 - Instruction manual for vacuum chamber packaging machines Mod. C254-C308-C312-C412-C420
2.7 MaINTENaNCE aNd TEChNICaL SUPPORT
This User Manual describes, in a clear and distinct manner, the maintenance, repairs and service operations
to be performed by the machine operators and those that require qualified and trained technicians from an
authorised after-sales and service centre.
always comply with the following guidelines when performing maintenance, service or repairs:
• Switch the machine off via the main switch and remove the plug from the socket.
• Comply with the scheduled maintenance and intervals stipulated in this manual. Delays or lack of maintenance
can lead to costly repairs.
• Only use original Friulmed S.r.l. spare parts, oils and lubricants.
• Use tools that are in good condition; do not leave tools inside the machine after use.
• Never intervene when the operations to be performed require a qualified technician from an authorised after-
sales centre.
• The operations must only be performed by Technical Support Centres authorised by Friulmed S.r.l..
• Any safety devices that are temporarily disabled or removed by a qualified technician for maintenance to be
performed, must be restored once the intervention is complete and their efficiency and functionality must be
verified.

3. RECOmmENdatIONS tO PROtECt thE ENvIRONmENt

PaCKagINg
• The packaging material is 100% recyclable and is marked with the recycling symbol.
• Comply with local Standards for disposal.
• Do not dispose of the material in the environment. The packaging material (plastic bags, polystyrene, etc.)
must be kept out of the reach of children as they are a potential source of danger.
SCRaPPING/dISPOSaL
• The appliance has been constructed with recyclable material. This appliance is marked in compliance
with European Directive 2002/96/EC - Waste Electrical and Electronic Equipment (WEEE).
• By ensuring that this appliance is scrapped correctly, you shall help prevent potential negative consequences
for the environment and health.
• The symbol on the appliance or on the accompanying documentation, indicates that this product must
not be treated as domestic waste but must be taken to a suitable recycling collection point for electric and
electronic equipment.
• Before scrapping, make the appliance unusable by cutting the power cable and removing the lid so that
children cannot access the inner part of the appliance.
• Scrap the appliance in compliance with local Standards regarding waste disposal and take it to an appropriate
collection point. Do not leave it unattended for even just a few days as it is a source of danger for children.
• For further information regarding treatment, recovery and recycling of this appliance, contact the relative local
department, the waste collection service or the dealer where the appliance was purchased.
81