Harbor Breeze 0080443 Manual De Instrucciones página 10

STANDARD OR ANGLE MOUNTING INSTRUCTIONS
3 . Slide the downrod (E) into the yoke of the motor
assembly (I), align the holes, and re-install the
downrod clip (EE) and downrod pin (DD) . Then re-
tighten the motor housing set screws (FF) and slide
the yoke cover (D) down until it rests on top of the
motor assembly (I) .
Haodwaoe Used
DD
Downrod Pin
EE
Downrod Clip
Motor Housing
FF
Set Screw
4 . Install the hanger ball portion on the top of the
downrod (E) into the mounting bracket (A) opening .
Rotate the fan until the slot on the hanger ball
engages the tab on the mounting bracket (A) .
WARNING: Be careful when aligning the tab
to the slot! If not fully engaged, there is a possibility
of the fan falling, which may result in serious injury or
death .
Proceed to the Wiring section of this manual .
3
E
EE
x 1
x 1
x 2
4
10
Lowes.com/harborbreeze
D
FF
DD
I
E
A
A