Care And Maintenance; Troubleshooting - Harbor Breeze 0080443 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND MAINTENANCE

At least twice each year, lower the canopy to check the downrod assembly, and then tighten all
screws on the fan . Clean the motor housing with only a soft brush or lint-free cloth to avoid scratching
the finish. Clean the blades with a lint-free cloth. You may occasionally apply a light coat of furniture
polish to wood blades for added protection .

Impootaat:
Shut off the main power supply before you begin any maintenance task . Do not use water
or a damp cloth to clean the fan .

TROUBLESHOOTING

PROBLEM
The fan does not
move .
The fan is noisy .
POSSIBLE CAUSE
1 . The reverse switch is not
engaged .
2 . The wall switch is turned off .
3 . The power is off or the fuse
(breaker) is blown .
4 . There is a faulty wire connection .
5 . The remote control battery power
is off .
6 . The dip switch settings are
incorrect in the remote control .
1 . The blades are loose .
2 . There is a cracked blade .
3 . The wall control is not compatible
with the fan .
4 . The break-in period has not
surpassed .
5 . The outlet box is not secure .
6 . The mounting bracket is not
secure .
7 . The speed control device is
unapproved .
CORRECTIVE ACTION
1 . Firmly push the reverse switch
to either the left or right .
2 . Make sure the wall switch is
turned on .
3 . Turn the power on or check the
fuse (breaker) .
4 . Turn the power off and check all
connections at the ceiling outlet
box .
5 . Install a new battery in the
remote control .
6 . Refer to the Operating
Instructions to set the dip
switches .
1 . Check and tighten all screws
that hold the fan blades to the
blade arms and the motor .
2 . Replace the cracked blade .
3 . Do not use a full range dimmer
switch to control the fan speed .
4 . Run the fan continuously for 24
- 48 hours on medium or high
speed for a "break in" period .
5 . Ensure the outlet box is secured
to the building structure .
6 . Ensure the mounting bracket is
secured to the outlet box and
that the screws are tight .
7 . Replace the speed control
device with an approved remote
control .
21
Lowes.com/harborbreeze

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

40094

Tabla de contenido