Harbor Breeze 0080443 Manual De Instrucciones página 17

FINAL INSTALLATION
10 . Remove the rubber washer (JJ), hex nut (KK), and
finial (M) from the light kit (K) and save.
Haodwaoe Used
JJ
Rubber Washer
KK
Hex Nut
11 . Install the bulbs (N) into the sockets on the light kit (K) .
Note: This fan has an energy-saving wattage limiter
included in the receiver . If you replace the included
40-watt candelabra-base bulbs with over 190 watts,
the fan will automatically turn off . Please ensure the
total bulb wattage is always below 190 watts .
12 . Raise the glass (L) up against the light kit (K) and
secure it with the rubber washer (JJ), hex nut (KK),
and finial (M).
Haodwaoe Used
JJ
Rubber Washer
KK
Hex Nut
10
x 1
x 1
11
K
12
x 1
x 1
L
17
Lowes.com/harborbreeze
JJ
KK
M
N
JJ
KK
M
K
K