Maintenance And Servicing; Completeness And Accessories - wissner-bosserhoff Carisma Manual De Instrucciones

21. MAINTENANCE AND SERVICING

The nursing home beds of Wissner-Bosserhoff GmbH are generally designed for a use-
ful life of 10-15 years. The beds here are extremely low in maintenance. This is because
attention was paid during the development of the products to ensure that maintenance
work was reduced to a minimum, with low operating costs.
In daily use, however, experience shows that there is also careless handling of products,
and rough handling can also contribute to them ageing quicker and to the wear of cer-
tain components, on which the manufacturer can have no direct influence.
For this reason, routine servicing examinations should be performed by the operator –
also to guarantee the availability of beds, which is in his own interest.
The Technical Customer Service of Wissner-Bosserhoff offers servicing and necessary
training covering all aspects of the product. Wissner-Bosserhoff certainly places gre-
at emphasis on training for customers, since only trained operators and maintenance
technicians can ensure proper handling and use of the beds.
Maintenance should be performed exclusively by competent specialists who have been
trained for the product by Wissner-Bosserhoff.
The manufacturer assumes liability for the safety and reliability of the product only if it
is regularly maintained and used in accordance with the operating, usage and safety
notes in these instructions for use.
If a function control, an inspection, measurement or maintenance reveals serious de-
fects that cannot be rectified, the product must be suspended from further use.
Wissner-Bosserhoff GmbH recommends a simple mechanical servicing at yearly inter-
vals.
In general the manufacturer assumes a servicing in accordance with the currently valid
dent prevention regulations (UVV) of the professional association. For this reason, BGV
Our Customer Service is available to you for any enquiries and to provide training and
test lists for individual products. (To make contact, see Sections 22 and 25)

21.1. COMPLETENESS AND ACCESSORIES

It must be determined, by means of the delivery note, the instructions for use and a visu-
al inspection, whether parts are missing, and therefore need to be ordered or replaced.
In general the accessories and other devices that are combined with the product must
also be checked. It must be ensured when doing this that only accessories authorised
by the manufacturer and permitted combinations of appliances are used.
Page 98
-