Lcd Back Light - OHAUS CW-11 Manual De Instrucciones

CW-11 Indicator
2.8 Initial Setup (Cont.)
2.8.5 Readout Menu (Cont.)

LCD BACK LIGHT

Press G/N/T/ MENU button, bLAutOis displayed. You
can select to have the LCD backlight either on
contiuously, off or in an automatic mode which
turns off the display in 5 seconds.
Press PRINT/ UNITS button, and either select ON, OFF
or Auto. Auto is the default setting.
EP
This is service function and is not a user operated
command. OFF is the default setting.
Not available w/LFT ON.
SAVE
Press G/N/T/ MENU button to end this block, SAVE is
displayed. All settings are retained.
Press G/N/T/ MENU button, setting are saved and
PRINT is displayed which is the next menu or press
PRINT/ UNITS button to go back to Setup menu
without saving.
NOTE:(If initial setup, go to the next paragraph. To
exit from the Setup, press PRINT/ UNITS button to
skip to PRINT then to LOCKSW, then QUIT. Press
G/N/T/ MENU button to go back to the weighing
mode).
EN-17