Section 6. Care Of Your Machine; Dismantling And Assembling Hook Race Unit; To Dismantle Hook Race Unit; To Assemble Hook Race Unit - Janome 385.2049LX200 Manual De Instrucciones

SECTION 6. CARE OF YOUR MACHINE
Dismantling and Assembling
Hook Race Unit
Note:
Turn off the power sw tch and/or unp ug the mach ne.
To dismantle hook race unit:
Raise the needle to its highest position and open the hook cover.
Open the hinged latch of bobbin case and take it out of the
machine.
Open the hook race ring holders and remove the hook race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry cloth.
Bobbin case
Hook race ring holder
(3) Hook race ring
_4_Hook
(5_ Hook race
To assemble hook race unit:
Hold the hook by the center pin and fit it carefully back into the
hook race, forming a perfect circle with the shuttle driver.
Attach the hook race ring making sure the bottom pin fits into the
notch.
Lock the hook race ring by turning the holders back into position.
Insert the bobbin case.
Pin
(7) Notch
I I L
®
®
Cleaning the Feed Dog
Note:
Turn off the power switch and/or unplug the machinebefore
c ean ng the feed dog.
Remove the needle and the presser foot,
Remove the needle plate set screw and remove the needle plate,
S
With a brush, clean out dust and lint clogging the feed dog teeth.
Reset the needle plate.
J
64