Starting The System On The Tcu; Support Modes; Changing Support Modes On The Tcu - Turbo vado SL Manual De Usuario

7.3
The VADO SL motor offers five different drive settings. TURBO, SPORT, ECO, OFF and SMART CONTROL.
TURBO MODE: Maximum power mode for high speed sections and climbing.
„
SPORT MODE: Maximum control, with sufficient power on demand.
„
ECO MODE: Most efficient mode for maximum range while offering good power.
„
OFF MODE: The motor will not offer any assistance, but the display and lights will still function.
„
SMART CONTROL MODE: The motor, while pedaling, adjusts the power output based on the ride parameters
„
determined in the Mission Control App.
INFO: The SMART CONTROL indicator light will only be visible on the TCU when the bicycle is
connected to the Mission Control App, and is in SMART CONTROL mode.
7.4
11

7.3. STARTING THE SYSTEM ON THE TCU

7.4. SUPPORT MODES

7.5. CHANGING SUPPORT MODES ON THE TCU

TURBO
SPORT
+
ECO
2
SEC
OFF
Bluetooth
SMART
CONTROL
To start the system, press and hold the POWER
button located on the TCU top tube LED display unit
until the horizontal LEDs glow blue.
To turn the battery (and support) off again, press and
hold the POWER button until the LEDs turn off.
The drive setting modes are displayed around the
S-Button (mode) (Fig. 7.1). Pressing the S-Button
cycles through the modes (Fig. 7.4).
The modes will cycle through the three main support
modes, starting at SPORT (default). OFF MODE is
activated by a long press of the S-Button (MODE).