Turbo vado SL Manual De Usuario página 28

11.7
95 % - 100 %
WARNING: When riding with a RE, always keep the RE cable plugged and locked into the charge
port of the bicycle. A loose cable can cause damage to your bicycle and the RE and can become an
obstruction which may cause you to lose control and fall.
CAUTION: When installing the bottle cage make sure to use the supplied screws. Longer screws
can cause damage to the RE.
WARNING: Use of a non specified bottle cage can cause the RE to come loose and fall out, causing
damage to both the bicycle and the RE. It may also cause you to lose control and fall.
MISSION CONTROL INTEGRATION
When Using the RE, both the internal battery and the RE are discharged simultaneously by default. In the Mission
Control App, you can choose to completely discharge the RE(s) first.
Riding in simultaneous discharge mode will result in the best motor support for the duration of your ride.
CHARGING YOUR RE
When charging the RE, you may use either the standard charger supplied with your bicycle or you can use the
optional Y-Splitter cable in conjunction with the charger to charge both the internal battery and the RE battery at the
same time. Please refer to the charging section of this manual for charging instructions.
INFO: The Y-Splitter cable is available through your Authorized Specialized Retailer.
CHARGE LEVEL DISPLAY WITH RE BATTERY
When the RE is attached to the bicycle, the charge level is displayed on the TCU, the TCD and the Mission Control
App. The displays adapt to show the state of charge for both internal and RE batteries.
Fig. 11.8: With both the internal battery and the RE fully charged, the TCD will show the two charge levels separately
(A), but also combine the two charge level amounts (B) to show a separate full charge level of 150 %.
11.8
INTERNAL
A
BATTERY LEVEL
Fig. 11.9 : With both the internal battery and the RE fully charged, the TCU shows the charge level as overlaying light
bars, the internal battery charge level is displayed with 10 blue light bars and the RE charge level is displayed with 5
green light bars (A).
The RE green light bars will overlay on the first 5 blue light bars of the internal battery light bars (B) and will hide
30 % - 94% 10% - 29%
INTERNAL
+
BATTERY
RANGE
EXTENDER
INTERNAL
BATTERY LEVEL
RANGE EXTENDER
BATTERY LEVEL
5% - 9%
B
90-100
80-89
70-79
A
60-69
50-59
=
80-100
40-49 40-49
=
60-79
30-39 30-39
=
20-29 20-29 40-59
=
10-19 10-19 20-39
=
0-9 0-9
0-19
%
0% - 4%
RANGE EXTENDER
BATTERY LEVEL
26