Introduction - Corghi LaserLine EM 9580 Plus Manual De Uso

INTRODUCTION

The purpose of this manual is to provide the
owner and operator with effective and safe
instructions for the use and maintenance of the
wheel balancer.
If these instructions are followed carefully, the ma-
chine will give you the efficient and long-lasting
service that has always characterised the manufac-
turer, thus making your work considerably easier.
The following paragraphs define the levels of
danger regarding the machine, associated with
the warning captions found in this manual.
DANGER
Refers to immediate danger with the risk of
serious injury or death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before starting
the machine. Keep this manual and all illustrative
material supplied with the machine in a folder
near it where it is readily accessible for consulta-
tion by the operators.
The technical documentation supplied is con-
sidered an integral part of the machine; in the
event of sale all relative documentation must
remain with the machine.
The manual is only valid for the machine model
and serial number indicated on the nameplate
applied to the machine itself.
EM 9580 Plus - EM 9580 C Plus - Operator's manual
WARNING
Comply with the contents of this manual: any
uses of the machine that are not specifically
described are under the full responsibility of
the operator.
Note
Some of the illustrations contained in this
booklet have been taken from pictures of pro-
totypes: standard production machines may
differ slightly in certain respects.
These instructions are for the attention of per-
sonnel with basic mechanical skills. We have
therefore condensed the descriptions of each
operation by omitting detailed instructions re-
garding, for example, how to loosen or tighten
the fixing devices. Do not attempt to perform
operations unless properly qualified or with suit-
able experience. If necessary, please contact
an authorised Service Centre for assistance.
UK
47