Compressed Air Hook-Up; Safety Regulations - Corghi LaserLine EM 9580 Plus Manual De Uso

WARNING
A good grounding connection is essential for
correct operation of the machine. NEVER connect
the machine ground wire to a gas pipe, water pipe,
telephone cable or any other unsuitable object.
COMPRESSED AIR
HOOK-UP
CAUTION
The compressed air hook-up may only be per-
formed if the pneumatic ring nut is supplied
(optional accessory supplied on request).
WARNING
All compressed air hook-ups must be carried
out by qualified personnel only.
- The hook-up to the workshop compressed air
system must ensure a minimum pressure of
8 bar.
- The union for connecting to the compressed air
system is of a universal type and therefore no
special or additional couplings are required.
A pressure-resistant hose with 6mm inner
diameter and 14mm outer diameter must be
fixed to the notched union using the hose clamp
provided with the machine.

SAFETY REGULATIONS

WARNING
Non-compliance with the instructions and
danger warnings can cause serious injuries to
the operator or other persons.
Do not operate the machine until you have read
and understood all the danger/warning notices
in this manual.
In order to operate the machine correctly, it is
necessary to be a qualified and authorised op-
erator, able to be trained and to know the safety
regulations. Operators are expressly forbidden
from using the machine under the influence of
EM 9580 Plus - EM 9580 C Plus - Operator's manual
alcohol or drugs capable of affecting physical
and mental capacity.
The following conditions are essential:
- Read and understand the information and
instructions described in this manual.
- Have a thorough knowledge of the features and
characteristics of the machine.
- Keep unauthorised persons well clear of the
working area.
- Make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force.
- Make sure that all machine operators are suit-
ably trained, that they are capable of using the
machine correctly and safely and that they are
adequately supervised during work.
- Do not touch power lines or the inside of electric
motors or any other electrical equipment before
making sure that they have been powered off.
- Read this booklet carefully and learn how to
use the machine correctly and safely.
- Always keep this user manual in a place where
it can be readily consulted and do not fail to
refer to it.
WARNING
Do not remove or deface the DANGER, WARN-
ING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If one
or more decals have been detached or dam-
aged, replacements can be obtained from your
nearest dealer.
- When using and carrying out maintenance on
the machine, observe the unified industrial
accident prevention regulations for high voltage
industrial equipment and rotating machinery.
- Any unauthorised alterations made to the
machine automatically release the manufac-
turer from any liability in the case of damage
or accidents as a result of such alterations.
Specifically, tampering with or removing the
machine's safety devices is a breach of the
regulations for industrial accident prevention.
WARNING
During work and maintenance operations,
always tie back long hair and do not wear
loose clothing, ties, necklaces, wristwatches
or any other items that may get caught up in
the moving parts.
UK
53