Removal Of Package - Fox F36-528A Manual De Instrucciones

Your table saw is delivered complete in a package.
Remove the table saw and all the parts from the packaging, check if there are any missing or damaged parts.
If you find any faulty or damaged parts do not use them in order not to endanger the efficiency and the safety of
the machine. To change faulty parts consult an after sales centre.
To make the table saw work perfectly you must assemble the various parts, for which you can find a detailed
explanation later on.
We recommend you to read carefully the assembly instructions and to follow them to the letter. Remove any
protections with a cleansing, as for example WD40. Do not use petrol or varnish thinner.
The following photos illustrate the parts included in the packaging besides the main body of the machine.
1. N° 2 Extensions supports
2. N° 1 Hind foot
3. N° 1 Aspiration pipe
4. N° 1 Wheels group
5. N° 4 Feet + N°4 rubber feet
6. N° 2 Short bars
7. N° 2 Long bars
8. N° 1 Pusher
9. N° 1 Rip fence
10. N° 1 Goniometer
11. N° 1 Aspiration outlet
12. N° 1 Upper protection
13. Screws and washers
14. N° 2 Wrenches for saw blade assembly
15. N° 1 Aspiration pipe case
16. N° 2 Handles
EN

REMOVAL OF PACKAGE

28