Stiga CS 40 Li Manual De Instrucciones página 165

5. No oil is released
6. The machine has struck
a foreign body.
7. Excessive noise and/or
vibration is experienced
whilst working
8. The machine gives off
smoke whilst working
9. Battery power reserve is low
Poor quality oil
Lubrication holes are clogged
Damaged or loose parts.
Loose or damaged parts
Machine damaged
Severe working conditions
requiring greater
current absorption
Battery is insufficient for
operating requirements
Decrease in battery capacity
EN - 16
When the motor is cold, empty
the tank, clean it and the
pipes with liquid detergent
and change the oil.
Clean them (chap. 7.6)
Stop the machine (chap. 6.9).
Inspect for damage.
Check for and tighten
any loose parts.
Have all checks, repair work
and replacements carried out
by an Authorised Centre only.
Turn off the machine,
remove the battery and:
– inspect for damage;
– check for and tighten
any loose parts;
– have any damaged parts
replaced or repaired with
parts having equivalent
specifications.
Do not use the machine.
Immediately turn off
the machine, remove
the battery and
Contact an Authorised
Service Centre.
Optimise operations
(par. 7.2.1)
Use a second battery or
extended battery (par. 7.2.1)
Purchase a new battery