Main Working Elements Of The Machine - Corghi HD 900 Manual De Uso

tion in the tyre on the machine using his own
equipment, a pressure of 0.5 bar must NOT be
exceeded (unless the tyre manufacturer does
require lower pressure levels), as indicated in
the UNI Standard 10588.
WARNING
Only original manufacturer equipment is rec-
ommended for use with the machine.
Figure 8 shows positions of the operator during
the various work phases. These positions are
referred to in the user instructions.
D
C
S
44
A
B
C
D
A
E
MAIN WORKING
ELEMENTS OF THE
WARNING
Get to know your machine: your familiarity
with its exact operation is the best guarantee
of safety and performance.
Learn the function and location of all com-
mands.
Carefully check that all controls on the machine
are working properly.
The machine must be installed properly, oper-
ated correctly and serviced regularly in order
to prevent accidents and injuries.
See fig.9.
A Main switch
B Locking clamp
C Pressure gauge
D Lifting point
E Turntable holder arm
F Turntable
G Bead breaker disc
H Hook tool
I Tool rotation lever
8
L Platform
F
- E
MACHINE
B
G
O
L
N
- Operator's manual HD 900
nglIsh
H
I
9
M