INFORMATION
ABOUT
DEMOLITION
If the machine is to be scrapped, remove all
electrical, electronic, plastic and metal parts and
dispose of them separately in accordance with
current provisions as prescribed by law.
ENVIRONMENTAL
INFORMATION
The disposal procedure described below only
applies to machines with the symbol of the waste
bin with a bar across it on their data plates.
This product may contain substances that can
be hazardous to the environment and to human
health if it is not disposed of properly.
We are therefore providing you with the informa-
tion below in order to prevent these substances
from being released into the environment, and
to improve the use of natural resources.
Electrical and electronic equipment must never
be disposed of in the usual municipal waste but
must be separately collected for their proper
treatment.
The crossed-out bin symbol, placed on the
product and on this page, reminds the user that
the product must be disposed of properly at the
end of its life.
Thus, the hazardous consequences that non-
specific treatments of the substances contained
in these products, or improper use of parts of
them, may have on the environment or on human
health are prevented. Furthermore, this helps to
recover, recycle and reuse many of the materials
contained in these products.
Electrical and electronic manufacturers and dis-
tributors set up proper collection and treatment
systems for these products for this purpose.
At the end of the product's working life, contact
your supplier for information about disposal
procedures.
When you purchase this product, your supplier
will also inform you that you may return another
66
worn-out appliance to him free of charge, pro-
vided it is of the same type and has provided the
same functions as the product just purchased.
Any disposal of the product performed in a
different way from that described above will
be liable to the penalties provided for by the
national regulations in force in the country where
the product is disposed of.
Further measures for environmental protection
are recommended: recycling of the internal and
external packaging of the product and proper
disposal of used batteries (only if contained in
the product).
With your help, we can reduce the amount of
natural resources used to produce electrical
and electronic equipment, minimise the use
of landfills to dispose of old products, and im-
prove quality of life by preventing the discharge
of potentially hazardous substances into the
environment.
RECOMMENDED
FIRE
EXTINGUISHING
EQUIPMENT
For the choice of the most suitable extin-
guisher, see the following table.
Materials
Liquids
dry
inflammable
Water
YES
Foam
YES
Powder
YES*
CO2
YES*
WARNING
This table contains general instructions
to be used as guidelines for the users.
All the applications of each type of ex-
tinguisher must be obtained from the
relevant manufacturer.
- E
- Operator's manual HD 900
nglIsh
Equipment
electric
NO
NO
YES
NO
YES
YES
YES
YES