Description Of The Mobile Control Unit Controls - Corghi HD 900 Manual De Uso

DESCRIPTION
OF THE MOBILE
CONTROL UNIT
CONTROLS
Fig. 10
CONTROL LEVER (P)
- Horizontal movement � tool carriage and
platform translation.
- Vertical movement � lower and raise turn-
table unit.
SWITCH (Q)
- Vertical movement � turntable unit open/
close control.
PEDAL (R)
- Tilting movement � turntable unit clockwise/
anticlockwise rotation.
P
R
WARNING
When locking a rim, continue to operate
the control to make sure that the maximum
pressure (130 bar) has been reached, which
- E - Operator's manual HD 900
nglIsh
can be checked on the pressure gauge (C,
Fig. 9).
WARNING
The distributor-turntable pressure tests are
performed with the wheel mounted.
WARNING
When working, always control the pressure of
the turntable.
NOTE.
Also check the pressure during tyre mounting
and demounting operations; to solve rim set-
tling problems, continue to operate the locking
control.
WARNING
Never stand the mobile control unit in water
puddles.
Q
10
UK
47