Maintenance - Corghi HD 900 Manual De Uso

WARNING
This operation can be extremely danger-
ous!
Perform it manually if you are absolutely
certain you can maintain the wheel equi-
librium only.
For heavy, large sized wheels you MUST
use a suitable lifting device.
14) Move the platform to move the wheel away
from the turntable.
15) Remove the wheel.
WARNING
Do not inflate the tyre with the wheel
still mounted on the turntable.
Tyre inflation is dangerous and should
only be done by removing the wheel
from the turntable and placing it inside
a safety cage.
- E - Operator's manual HD 900
nglIsh

MAINTENANCE

WARNING
The manufacturer declines all liability
for claims derived from the use of non-
original spare parts or accessories.
WARNING
Unplug the machine from the socket and
make sure that all moving parts have
been locked before making any adjust-
ments or maintenance work.
WARNING
Do not remove or modify any part of this
machine (except for assistance).
WARNING
Before removing unions or pipes, make
sure that the fluids are not pressurised.
If pressurised oil escapes, it can cause
serious injury.
CAUTION
Keep the working area clean.
Do not use pressurised water jets to
wash the machine.
You are strongly advised not to use
compressed air to clean moving
components.
When cleaning, take care not to create
and raise dust as far as possible.
For perfect operation and greater dura-
tion of your tyre changer, following these
instructions carefully:
1) Clean the following parts with diesel oil and
lubricate:
- the various joints on the turntable
- the tool holder arm guide
- the carriage guide plate
2) Grease the turntable holder arm lifting
cylinder and arm joint periodically using the
grease nipples (see fig. 39).
Use ordinary lubricating grease.
UK
63