Night Light - miniland baby digimonitor 3.5 plus Manual Del Usuario

ENGLISH
7. Lullaby icon (d) will be displayed at the top of the LCD screen.
Keep in mind that the configuration of the lullabies will take place only on the camera that is
being watched in that moment.
Note: Lullaby loop function plays in cycle all the lullabies.
5.2.7.2.2. CAMERA VOLUME
This menu will allow you to configure the volume level at which the parents' voices will be
reproduced on the camera by using the two-way function and the volume at which the lullabies
will be heard.
In order to configure the camera volume, follow the next steps:
1. Press for 3 seconds the Menu/Back
2. Press the UP
Then press the
3. Press the UP
press the key;
4. Press the UP
available (HIGH/MID/LOW) you prefer.
5. Confirm the selection pressing the
Bear in mind that the volume will only be configured for the camera whose image you are
viewing on the monitor at that time.

5.2.7.2.3. NIGHT LIGHT

The baby unit has a nightlight which emits a soft light, providing your baby with comfort and
allowing it to see in a dark room.
To activate the night light, please, follow the next steps:
1. Press for 3 seconds the Menu/Back
2. Press the UP
Then press the
3. Press the UP
the key;
4. Press the UP
5. Confirm the selection pressing the
Bear in mind that the volume will only be configured for the camera whose image you are
viewing on the monitor at that time.
5.2.7.3. VOX/STANDBY MENU
5.2.7.3.1. STANDBY SETTING
With the Standby mode you can choose the maximum time the monitor image remains active
(1, 3 or 5 minutes); after this time the image disappears but the sound continues to be heard in
order to save energy. To reactivate the image, just press any key.
To activate this mode you should:
1. Press for 3 seconds the Menu/Back
key or DOWN key until the camera settings menu icon
key enter into the sub-menu.
key or DOWN key until the camera volume icon
key or DOWN key, choose whichever of the three camera volume levels
key or DOWN key until the camera settings menu icon
key enter into the sub-menu.
key or DOWN key until the nightlight icon
key or DOWN key, select ON/OFF to activate or deactivate this function.
key and the menu will pop up.
key.
key and the menu will pop up.
key.
key and the menu will pop up.
34
is highlighted.
is highlighted. Then,
is highlighted.
is highlighted. Then, press