miniland baby digimonitor 3.5 plus Manual Del Usuario página 36

ENGLISH
1. Press for 3 seconds the Menu/Back
2. Press the UP
Then press the
3. Using the UP
4. Confirm the selection pressing the
5. Press the Menu/Back
5.2.7.5. ALERT SETTING
To set the alert, follow the next instructions:
1. Press for 3 seconds the Menu/Back
2. Press the UP
key.
3. Press the UP
and DOWN to count down).
4. Confirm the selection pressing the
5. Press the Menu/Back
Note 1: Once the alert is running, an alarm clock icon (k) will be displayed on the LCD screen.
Note 2: If you want to remove the alarm follow the steps 1 to 3 mentioned above and set the
time to 00:00. The clock icon will disappear.
Note: When the alert is ringing, press any key to cancel it. If there is no answer, the ringing will
last 7 minutes and then stop.
5.2.7.6. VIBRATION FUNCTION
This function allows parents to achieve a silent environment when they need peace and quiet
and it is a great help in noisy environments and for people who have hearing problems.
When the sound in the baby's room exceeds the threshold marked by the sensitivity level
configured, the monitor will vibrate on four occasions to warn the parents.
To activate the vibration function, follow the next steps:
1. Press for 3 seconds the Menu/Back
2. Press the UP
highlighted. Then press the
3. Using the UP
this feature.
4. Confirm the selection pressing the
5. Press the Menu/Back
Bear in mind that the vibration function will only be configured for the camera whose image you
are viewing on the monitor at that time.
NOTE: In order for the monitor to vibrate when the volume in the baby's room exceeds a
certain threshold, it is vital for the VOX mode to be active.
5.2.7.7. LUMINOSITY
To modify the luminosity of your monitor, follow the next steps:
1. Press for 3 seconds the Menu/Back
2. Press the UP
key or DOWN key until the transmission level menu icon
key.
key or DOWN key, select the transmission level desired: HIGH or LOW.
key to return to the main screen.
key or DOWN key until the alert icon
key or DOWN key to set the alarm time (press UP
key to return to the main screen.
key or DOWN key until the vibration setting menu icon
key.
key or DOWN key, select ON/OFF if you want to activate or deactivate
key to return to the main screen.
key or DOWN key until the luminosity setting menu icon
key and the menu will pop up.
key.
key and the menu will pop up.
key.
key and the menu will pop up;
key.
key and the menu will pop up.
36
is highlighted.
is highlighted. Then press the
key to increment
is
is