Riser Pipe; If An Adapter Is Required - Grundfos SP Serie Instrucciones De Instalación Y Operación

Fig. 6 Cutting and stripping the motor
leads
Fig. 7 Crimping the connectors
Fig. 8 Applying heat to the connector
Fig. 9 Completed splices
12

6.6 Riser pipe

Make sure that the riser pipe or hose
are properly sized and selected on
Note
the basis of estimated flow rates and
friction-loss factors.

6.6.1 If an adapter is required

We recommend that you first install the riser
pipe to the pipe adapter. Then install the riser
pipe with the adapter to the pump outlet port.
Use a back-up wrench when attaching the riser
pipe to the pump. Make sure that the pump is
gripped only by the flats on the top of the outlet
chamber. The body of the pump, cable guard or
motor must not be gripped under any
circumstance.
Pipe adapters
or
Fig. 10 Pipe adapters
Riser pipe
Pump outlet