SRAM Rock Shox VIVID Manual Del Usuario página 2

English
rockshox viviD shock fEatUrEs*
low speed
compression adjuster
Ending stroke
rebound adjuster
seal head
Drop stop
Beginning stroke
rebound adjuster
shaft Eyelet
spacer
Mount hardware assembly
*the features available on your shock may differ from the model shown

Vivid User Manual
Body Eyelet
Mount hardware
Preload collar
shock Body
spring
spring retainer
Mount hardware
Pin
95-4115-001-000 Rev B
Vivid User Manual
congratUlations!
You have the best in suspension components on your bicycle! Our intent with this manual is to help you
set up your shock so you can achieve your best ride performance possible. We believe the better you
understand how your shock adjustments can impact and improve your ride, the more you will want to
ride and have fun! So please take the time to read and learn about your RockShox Vivid shock.
In addition, this manual contains important information about the safe operation and maintenance of your
shock. To ensure that your RockShox shock performs properly, we recommend you have a qualified
bicycle mechanic service your shock. We also urge you to follow our recommendations to help make
your bicycling experience more enjoyable and trouble-free.
i m p o r t a n t
consumer safety information
1. The shock on your bicycle is designed for use by a single rider, on mountain trails, and
similar off-road conditions.
. Before riding the bicycle, be sure the brakes are properly installed and adjusted. Use
your brakes carefully and learn your brakes' characteristics by practicing your braking
technique in non-emergency circumstances. Hard braking or improper use of the front
brake can cause you to fall. If the brakes are out of adjustment, improperly installed or
are not used properly, the rider could suffer serious and/or fatal injuries.
. Your shock may fail in certain circumstances, including, but not limited to, any condition
that causes a loss of oil; collision or other activity bending or breaking the shock's
components or parts; and extended periods of non-use. Shock failure may not be visible.
Do not ride the bicycle if you notice bent or broken shock parts, loss of oil, sounds of
excessive topping out, or other indications of a possible shock failure, such as loss of
shock absorbing properties. Instead, take your bike to a qualified dealer for inspection
and repair. In the event of a shock failure, damage to the bicycle or personal injury may
result.
4. Always use genuine RockShox parts. Use of aftermarket replacement parts voids the
warranty and could cause structural failure to the shock. Structural failure could result in
loss of control of the bicycle with possible serious and/or fatal injuries.
5. Observe all owner's manual instructions for care and service of this product.
shock installation
It is extremely important that your RockShox shock is installed correctly by a qualified bicycle mechanic.
Consult your bicycle manufacturer's instructions for proper installation of your rear shock.
w a r n i n g
IMpROpERlY InSTAllED REAR SHOCkS CAn BE ExTREMElY DAngEROUS
AnD MAY RESUlT In SEVERE AnD/OR fATAl InjURIES.
©SRAM Corporation • 007
English