System Bit Lists - Mitsubishi a2 Serie Manual Del Usuario

α
2 Simple Application Controllers
14.2

System Bit Lists

There is the system bit controlled by system and the control bit to control from user program.
14.2.1 System Bit Lists
Table 14.2: System Bit Lists
System Bit
M01
M02
M03
M04
M05
M06
M07
M08
M09
M10
M11
M12
M13
M14
M15
M16
M17
M18
M19
M20
M21
M22
M23
M24
Always "ON"
Always "OFF"
Alternate - 0.5 seconds "ON", 0.5 seconds "OFF"
"ON" when Real Time Clock data error occurs
"ON" when Summer time schedule is activated
"ON" when communication Error of AS-interface occurs
"ON" when communication Error by AS-interface power failure occurs
ON when turn Stop mode turns to Run mode in the
a pulse output and then turns OFF.
OFF when turn Stop mode turns to Run mode in the
as a pulse output and then turns ON.
"ON" during DCF77 decoding.
Pulses "ON" when DCF77 finishes decoding without an error.
"ON" when CD (DCD) signal is turned ON (receiving CD signal from modem)
"ON" when it is possible to access the GSM network.
α
"ON" when the 2 series is accessed via GSM.
"ON" when DCF77 decoding with an error.
"ON" when external power for the AL2-2DA board is ON.
"ON" when there is a sensor defect at I01
"ON" when there is a sensor defect at I02
"ON" when there is a sensor defect at I03
"ON" when there is a sensor defect at I04
"ON" when there is a sensor defect at I05
"ON" when there is a sensor defect at I06
"ON" when there is a sensor defect at I07
"ON" when there is a sensor defect at I08
Key, System Bit and Function Block Lists 14
Description
α
2 Series. The ON signal acts as
α
2 Series. The OFF signal acts
ENG-86