Applicable Error Checks - Mitsubishi a2 Serie Manual Del Usuario

α
2 Simple Application Controllers
13.4.7

Applicable Error Checks

1) In the event that the input voltage is greater than 11 V or equal to 0V the following system
flags will be set.
Table 13.8:
M17
M18
M19
M20
M21
M22
M23
M24
- If the flags in the table above are activated, check that:
• a sensor is connected
• there is not a break in the sensor connection
• the temperature is not greater than the specified limit
• power is being supplied to the AL2-2TC-ADP .
0: Normal
1: Defect at I01
0: Normal
1: Defect at I02
0: Normal
1: Defect at I03
0: Normal
1: Defect at I04
0: Normal
1: Defect at I05
0: Normal
1: Defect at I06
0: Normal
1: Defect at I07
0: Normal
1: Defect at I08
AL2-2TC-ADP 13
ENG-84