Springlane Mia Manual De Instrucciones página 29

HEAT MILK AND MAKE MILK FROTH
1.
4.
1. Lift the lid off the milk container.
2. Place the desired stirrer insert into the milk container. Use the smooth insert
for simple heating of the milk and the ribbed one for hot or cold milk froth.
3. Pour in the desired amount of milk. Always make sure that the minimum
capacity (100 ml) is reached and that the maximum capacity (250 ml) is not
exceeded to prevent overheating and overflowing.
4. Close the milk container with the lid.
5. Centre the filled milk container on the magnetic heating plate of the base
station and insert the power plug into the socket.
6. Activate the desired programme by pressing the operating button (see section
on programme selection).
The stirring and frothing process begins after activation. After 1-4 minutes
(depending on the filling quantity and the milk's initial temperature), the device
stops automatically, and the signal light turns off. The milk is now ready.
Press the operating button again once to prematurely terminate the
programme – the device will stop immediately.
2.
5.
3.
6.
29