VOLTWERK VC 200 Instrucciones De Servicio página 103

Transformerless central inverter
Keep the operating area dry.
|
Seal cable grommets to the operating area correctly.
|
Risk of fatal injury due to foreign objects!
Arcing can occur in electrical systems, and foreign objects (aggressive,
chemical or combustible materials) may catch fire.
Keep electrical systems dry, clean and free of foreign objects.
|
Keep electrical systems free of combustible or explosive materials and
|
aggressive or corrosive gases.
Before commissioning, clean the operating area, including the cable
|
cellar and the air passageways completely and remove any foreign
objects.
Risk of fatal injury due to earthed solar generator!
A fault in the DC cabling can cause a short circuit or arcing. If there is an
insulation fault in the solar generator, touching the solar generator can
cause death or serious injury. The risk of fatal injury is increased in an
earthed solar generator. Service engineers must be advised of the earthing
so that they can operate accordingly in the event of malfunction.
Clearly mark earthed solar generators.
|
Risk of injury due to high temperatures!
The components of the device may reach temperatures of up to 150°C,
which can cause serious burns.
After switching off the device, wait for an appropriate period before
|
touching.
Do not touch hot components.
|
Material damage due to differing specifications!
The device is designed exclusively for operation in accordance with the
specifications. Use under other conditions may cause damage to the
product and may lead to losses in electricity fed into the grid.
Observe the specifications.
|
Material damage due to blocked ventilation!
Foreign objects stored in the operating room may obstruct the ventilation
and result in material damage and loss of yield.
Keep central inverters, floors and air ducts free of foreign objects.
|
Keep the operating area dry, clean and free of foreign objects.
|
Keep air inlets and outlets of the central inverter and of the operating
|
area free of foreign objects.
Keep the operating area free of combustible or explosive materials and
|
aggressive, caustic or corrosive gases and substances.
Operating manual
2 Safety
13