Measurements - VOLTWERK VC 200 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Connection via router
Result
5.8
Transformerless central inverter
If you wish to make sure and the router supports it, the manufacturer
|
recommends that the IP and Mac address of the central inverter are
permanently assigned to each other in the router.
This will prevent the central inverter from being assigned a new IP
address whenever the PC is restarted. The device can then always be
accessed in the network under the same IP address.
Creating a local connection
1. Inside of cabinet door: Plug one end of the network cable into the
Ethernet port of the display.
2. PC: Plug the other end of the network cable into the Ethernet port.
or
Plug the other end of the network cable into the Ethernet port of the
router.
The DHCP service assigns the PC an IP address.
Only if a DHCP service is not available in the router:
PC: Define a suitable network address on the PC (see PC operating
|
system information).
3. PC: Start the internet browser.
4. PC: Enter the IP address of the central inverter (192.168.0.111,
standard setting) in the address line of the internet browser and
confirm.
The basic menu of the display is displayed.
The local connection has been made.

Measurements

To complete the installation, make the measurements and record the
results as well as the measuring equipment used. The measurement
results must comply with the requirements of the applicable standards,
directives and the requirements of the energy supply company, as well as
the device specifications (see Specifications, page 87). Store the
measurement protocol near the photovoltaic system.
Safety instructions
Use any safety devices fitted to the measurement device and follow
|
any safety instructions shown on the device.
Observe safety guidelines for conducting measurements on live
|
systems and components.
Standards for measurements taken from the solar generator (DC) and
|
of the mains voltage (AC) must be carefully adhered to.
follow the instructions in the measuring equipment operating manual.
|
Operating manual
5 Installation
63

Publicidad

Tabla de contenido
loading

Productos relacionados para VOLTWERK VC 200

Este manual también es adecuado para:

Vc 300Vc 350

Tabla de contenido