Display: Setting The Language, Time And Date; Display: Setting The Grid Standard And Parameters - VOLTWERK VC 200 Instrucciones De Servicio

6 Commissioning
6.2.2
Result
Result
6.2.3
70

Display: Setting the language, time and date

Setting the menu language
1. Basic menu: touch the Settings button.
The Settings submenu appears.
2. Touch the Language button.
The Language submenu appears.
3. Check the language setting.
4. Select language: touch the appropriate button.
Menu language is set.
Checking the time and date
1. Basic menu: touch the Settings button.
The Settings submenu appears.
2. Touch the Time, date button.
The Time, date submenu appears.
3. Check the time zone, date and time setting.
A correct time setting is essential for the correct data display in the
|
display.
If the device is connected to the internet, the time and date will be
|
synchronised automatically with the time server.
If you wish to set the time and date manually:
4. Disable the Synchronise time setting with time server
automatically function.
5. Adjust the settings for the time and date: Touch the
6. Touch the Adopt button.
The display starts again. This may take a few minutes.
Time and date checked.

Display: Setting the grid standard and parameters

During commissioning, you must set the applicable grid standard (grid
connection directive) of the photovoltaic system in the display of the
central inverter. The manufacturer has defined country-specific parameter
sets in line with the grid connection directive. The country-specific
parameter sets contain the upper and lower thresholds of the grid voltage
and the grid frequency.
Setting the country of use and the grid standard
1. Basic menu: touch the Settings button.
The Settings submenu appears.
2. Touch the Grid standard button.
The Local setting submenu appears.
3. Select the location and the applicable grid standard.
Operating manual
Transformerless central inverter
and buttons.