Chrono; Language; Display - Extraflame HP 15 Manual Del Usuario

• CHRONO

The chrono allows to program 4 time spans within a day to use
every day of the week.
The switch-on and switch-o time can be set in every time
slot, along with the days of use of the programmed time slot
and the desired water temperature (65 - 80°C).
TO ENABLE THE CHRNONO, FOLLOW THE INSTRUCTIONS
DESCRIBED IN "ENABLE CHRONO" CHAPTER
Ignition hour
Shutdown hours:
Forward
RECOMMENDATIONS
The ignition and switch-o times must be within the arc of
one day, from 0 to 24 and not over several days:
Before using the chrono function, set the current day and
time. Therefore check that the points listed in the "Set
clock" sub-chapter have been followed, so that the chrono
function works. As well as programming it, activate it as
well.

• LANGUAGE

(See chapter before ignition)

• DISPLAY

- Buzzer
- Brightness
- Contrast
The Display menu allows you to:
Š Enable / disable the buzzer.
Š Adjust the brightness of the display
Š Adjust the contrast of the display
Setting
EXAMPLE
Switch-on time 07:00
Switch-o time 18:00
Switch-on time 22:00
Switch-o time 05:00
ENGLISH
Temperature set
R
Days enabled
Days not enabled
1 = Monday
2 = Sunday
Back
CORRECT
INCORRECT
73 73