First Use From New - Num'axes CANIBEEP RADIO PRO Manual De Instrucciones

First use from new

Activate/deactivate the remote control
Remote control is supplied with battery fi tted. As soon as the battery is in place, the remote
control is ready for use. If the remote control is not to be used for a long period or if you wish to
turn it off, you should remove the battery from its housing.
Fitting the battery in the CANIBEEP RADIO PRO collar
– Unscrew the 4 screws of the top of CANIBEEP RADIO PRO collar using a Phillips screwdriver.
– Insert the battery (3V lithium CR123A) paying attention to follow polarity indicated on the
battery housing.
– A beep sound (low pitch) is emitted and the red indicator fl ashes, indicating the battery has
been properly inserted.
– Put the top cover back in place in the right way. Check that the LED window is located right
above the indicator LED inside the collar (See Diagram 1). Ensure that the rubber seal is in
its groove, and check that both rubber seal and groove are clean in order to avoid any water
tightness problem.
– Firmly screw up the 4 screws in order to maintain your product's water tightness.
You can now turn your CANIBEEP RADIO PRO collar On.
Fitting the strap
GB - 26
Diagram 4 m 4
3
1
2