How To Use The Remote Control - Num'axes CANIBEEP RADIO PRO Manual De Instrucciones

Sound volume
adjustment
screw
High sound volume

How to use the remote control

The remote control is designed to operate with 3 different collars with an approximate 300
meters range. The colour of the remote control buttons matches the colours of the 3 collars:
yellow, orange and blue. When you activate the remote control, it works immediately (there is no
On/Off button). For each collar, 5 functions are available starting from the remote control:
– Activate the collar,
– Locate the dog by emitting beep sounds when you wish,
– Temporarily deactivate the collar,
– Reactivate the collar after it was temporarily deactivated,
– Completely switch off the collar.
1) Activate the collar thanks to the magnetic switch situated at the red mark on the remote
control. See § Switching on the collar.
2) Locate the dog (modes 9 to 12): briefl y or continuously press the « locate button »
remote control, (button on the right of the remote control of the same colour as the collar) to
activate a beep sound on the collar whenever your dog is pointing or moving.
GB - 32
Diagram 8
Maximum
sound
volume
Low sound volume
Medium sound volume
Minimum
sound
volume
STOP STOP
on the