Set Antenna Menu - SPE SEGUNDA SERIE Manual De Usuario

18.5 SET ANTENNA Menu.

The SET ANTENNA is for setting the proper antennas for every ham band relative to
the two inputs; the available choiches are:
• 1, 2, 3, 4 corresponding to the individual output connectors mounted on the rear
panel of the amplifier (ANT1, ANT2, ANT3, ANT4).
• NO means that there is no antenna setting for a certain ham band; this kind of
setting also causes the tuning memories to be restored to factory defaults.
Note: up to two different antennas can be assigned to every one of the ten ham bands; these
choices are shown on the same line of the label band. Each of the two settings can be
recalled while either in STANDBY or in OPERATE by simply pressing the [ANT] key
which switches them back and forth.
Manual de usuario
[SET]
Página 50 de 50
EXPERT 1K-FA
After entered the menu, the
amplifier's current antenna setting
is shown as the default choice (in
this example is the 160 m band
coupled with ANT1).
For making any change, the [SET]
key must be repeatedly pressed
until the wanted antenna value
appears as the current choice (in
this example ANT2).
Using the selection arrow keys
([◄▲] [▼►]), all the menu items
can be selected. The contextual
help line shows a short description
of the current operation (in this
example on the second antenna of
the 160 m band).
[SET]