Set Cat Menu - SPE SEGUNDA SERIE Manual De Usuario

Manual de usuario EXPERT 1K-FA

18.6 SET CAT Menu

[SET] [SET]
The SET CAT menu allows setting (or exclusion) of the CAT (Computer Aided
Transceiver) interface. This interface, if present in the connected transceiver, allows the
amplifier to read frequency and band information from the transceiver even whilst in
receive mode. This means the antenna switch and ATU settings are effected even
whilst in receive mode.
During transmission the internal logic bound to the frequency-counter measurements
will override (eventually correct) and validate this information.
When the SET CAT menu is entered, the current setting is selected:
To change the current setting to a new one, select one of the proposed choices using
the arrow keys ([◄▲] [▼►]) and then confirm it using the [SET] key:
Next will be presented a new menu showing the supported models (e.g. the ICOM
transceivers are equipped with two kinds of interface: CI-V and VOLTAGE_BAND): the
choice selected has to be validated using the [SET] key:
Página 52 de 52