SPE SEGUNDA SERIE Manual De Usuario página 51

At the end of the desired setting operations, the SAVE option must be chosen and
confirmed using the [SET] key in order to save all the data relative to the
bands/antennas to the amplifier's storage memory; these settings will be available until
over-written.
As a confirmation of the data save, the "DATA STORED!" message will appear and,
then, the Main Display Page which restores the system in STANDBY mode.
The ANT cell of the Status Bar shows, in this example, the new antenna value (ANT 2)
which has been selected for the tuned 160 m band.
If the user wants to repeat the same kind of operation on the other input (in this example
input 2), the right input must be switched using the [INPUT] key just before entering the
Setup Options Menu and repeating the above described procedure.
The Status Bar always shows the updated value of the selected input.
Manual de usuario
Página 51 de 51
EXPERT 1K-FA
To edit the antenna setting for
another band the arrow key ([◄▲]
[▼►]) must be used to select the
proper choice and, then, repeat
the above described procedure.