Spe Cat Settings; Icom Cat Settings - SPE SEGUNDA SERIE Manual De Usuario

18.7 SPE CAT Settings

Note: SPE CAT doesn't need any baud-rate setting since it is internally fixed.

18.8 ICOM CAT Settings

Note: when CI-V setting is made, the transceiver must be enabled in its "TRANSCEIVE ON"
status following the proper setup sequence described in its reference manual.
Note: if the analog VOLTAGE_BAND inteface is chosen, the baud-rate setting will not be
shown as it is useless. In order to avoid troubles, this setting must be chosen only if the
transceiver is not equipped with any CI-V CAT interface.
Manual de usuario
[SET]
[SET]
[SET]
[SET]
[SET]
Página 54 de 54
EXPERT 1K-FA
[SET]
[SET]
[SET]