Adjustment; Packaging, Transport And Storage; Mounting; General Instructions - Vega VEGAPULS WL S 61 Manual De Instrucciones

4 Mounting

ment, in pump stations as well as storm water
overflow tanks. The flood-proof IP 68 housing of
VEGAPULS WL S 61 ensures a maintenance-
free permanent operation. An integrated Blue-
tooth module enables the wireless communica-
tion with smartphone, tablet or PC.
Functional principle
The antenna of the radar sensor emits short
radar pulses with a duration of approx. 1 ns.
These pulses are reflected by the product and
received by the antenna as echoes. The transit
time of the radar pulses from emission to recep-
tion is proportional to the distance and hence to
the level. The determined level is converted into
an appropriate output signal and outputted as
measured value.
3.3

Adjustment

Wireless adjustment
The adjustment of VEGAPULS WL S 61 is
carried out via standard adjustment instruments:
•
Smartphone/tablet (iOS or Android opera-
ting system)
•
PC/notebook with Bluetooth USB adapter
(Windows operating system)
1
Abb. 19: Wireless connection to standard operating
devices
1 Display and adjustment module
2 Sensor
3 Smartphone/Tablet
4 Bluetooth USB adapter
5 PC/Notebook
26
2
4
3
3.4 Packaging, transport and
storage
Packaging
Your instrument was protected by packaging
during transport. Its capacity to handle normal
loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists
of environment-friendly, recyclable cardboard.
For special versions, PE foam or PE foil is also
used. Dispose of the packaging material via
specialised recycling companies.
Transport
Transport must be carried out in due conside-
ration of the notes on the transport packaging.
Nonobservance of these instructions can cause
damage to the device.
Transport inspection
The delivery must be checked for completeness
and possible transit damage immediately at re-
ceipt. Ascertained transit damage or concealed
defects must be appropriately dealt with.
Storage
Up to the time of installation, the packages
must be left closed and stored according to the
orientation and storage markings on the outside.
Unless otherwise indicated, the packages must
be stored only under the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
Storage and transport temperature
•
Storage and transport temperature see
chapter "Supplement - Technical data -
Ambient conditions"
•
Relative humidity 20 ... 85 %
4 Mounting
4.1

General instructions

Suitability for the process conditions
Make sure that all parts of the instrument expo-
sed to the process are suitable for the existing
process conditions.
VEGAPULS WL S 61 • 4 ... 20 mA